Moving Home With SR5000: A Professional Handover Checklist

Short answer: do not treat an SR5000 move as one transferable installation. Close the existing site under a written professional scope, preserve the system records, and assess the new property as a separate project. The reviewed product evidence does not establish a removal sequence, lifting method, transport approval or permission to reconnect at another address.

Choose the property outcome before arranging work

Possible outcome	Questions to answer first	Evidence that is still missing here
Leave the system with the property	Who owns it after completion, what records transfer, and who accepts ongoing service responsibility?	Property contract terms, warranty treatment, buyer acceptance and a signed handover
Remove and store it	Who is authorised to close the old site, what condition record is required, and what storage guidance applies?	Model-specific removal, isolation, handling and storage instructions
Move it to the new property	Can the old site be closed correctly, can the equipment be handled and transported, and is the new site independently suitable?	Carrier acceptance, manufacturer advice and every new-site decision

Do not let a removal quotation silently answer all three rows. Ask each provider to state exactly which stage is included and which stage belongs to someone else.

Treat the old and new addresses as two separate projects

Old-site closeout	New-site assessment
Identify the installed model, serial, revision and connected equipment	Identify the proposed location, access, structure, environment and service route
Confirm who may decommission the system and what records they will issue	Obtain current owner, building, network and national decisions for the new address
Record condition, configuration, alarms, maintenance and visible damage before work	Compare the current model documentation with the proposed system design
Define what is left safe, labelled and documented after removal	Define who approves, installs, commissions and signs off the new arrangement

The European Commission's solar-in-buildings page notes that building design for solar can involve structural support, orientation and roof or facade design. That is useful context for treating the destination as a fresh site question; it does not approve a particular property or decide national rules.

What the SR5000 record establishes

Recorded field	Planning meaning	Do not infer
5120Wh nominal LiFePO4 capacity	This is a fixed home-storage energy class	Transport classification, movable design or usable delivered energy
Approximately 59kg manual-derived net weight	Access and professional handling scope matter	A lifting team size, lifting points or a safe carrying method
Grounding and clearance notes	Site condition and documentation must be preserved and reassessed	That the old arrangement can be copied at the new address
Manual-derived qualified-technician boundary for installation and maintenance	Use a qualified path for move-related technical work until exact current guidance resolves scope	A do-it-yourself removal or reconnection procedure

The record also contains a user-confirmed note about ordinary-user installation. Because that sits beside stricter manual-derived technician language and does not describe moving or decommissioning, use the stricter boundary for this decision until the current exact documentation clarifies responsibility.

Review the current SR5000 Europe page with the model, serial and installed configuration in front of you. Public product copy is a starting point, not the missing removal or transport method.

Build one handover pack before anyone disconnects or moves equipment

• Exact model, serial number and delivered regional version.
• Current manual revision and any manufacturer service instructions supplied for that unit.
• Original installation, commissioning, inspection and maintenance records.
• Photographs of labels, connections, clearances, cable routes and the surrounding area before work.
• Configuration and app records that the manufacturer says may be exported or transferred.
• Warranty documents plus written clarification on ownership, address or installer changes.
• A condition report that records damage, warnings, water exposure, unusual heat or unresolved faults.
• Separate signed scopes for old-site closeout, handling or storage, transport where accepted, new-site design and commissioning.

Do not open the battery enclosure, improvise lifting points, give a carrier an unsupported battery description or copy a grid connection from the previous property. Those decisions require the exact current documents and responsible professionals.

Questions for FlashFish, the installer and the mover

Ask FlashFish or the model-specific service route

• Which exact manual and service notice apply to this serial and regional version?
• Is relocation supported, and if so, what authorised removal, storage and recommissioning process applies?
• What documents are required to preserve warranty or service history?
• What handling and transport information may be given to a qualified carrier?

Ask the old-site professional

• What is included in decommissioning, and what safe end state will be left at the property?
• Which components, settings and records will be labelled and handed over?
• Who records condition and unresolved faults before the unit leaves the site?

Ask the new-site assessor

• Does the proposed location meet structural, environmental, clearance, access and service requirements?
• Which owner, building, network and national decisions are needed for this address?
• Does the proposed configuration match the exact SR5000 documentation and other equipment?

Frequently asked questions

Can I assume the SR5000 can move to my new home?

No. Relocatability, removal, transport and new-site acceptance are not established by the reviewed evidence.

Can the old property's permission transfer?

Do not assume so. Obtain current written decisions for the new address and configuration.

Is SR5000 a carryable portable station?

No. The manual-derived record lists approximately 59kg and fixed home-storage interfaces. It needs model-specific professional handling advice.

What should stay in the handover pack?

Keep the exact manual, serial and configuration record, installation and service documents, condition photographs, warranty evidence and signed work scopes.

Should removal be booked before the new site is accepted?

First define the old-site, handling or storage and new-site scopes separately. Removing the unit does not establish that it can be recommissioned elsewhere.

Make the next decision in writing

Ask every party to mark its scope as included, excluded or waiting on evidence. A responsible answer may be to leave the system with the property, store it pending review or stop the relocation plan entirely.

Ask FlashFish Europe for current SR5000 guidance, then give the response and your handover pack to the responsible old-site and new-site professionals.

Sources and evidence limits

• FlashFish Europe SR5000 page and the authoritative exact-model record — current product route and bounded model facts.
• FlashFish Europe Support Center — current route for exact documentation and clarification.
• European Commission: solar energy in buildings — general building-design context only.

Evidence checked 25 October 2026. No removal, lifting, transport, property, network or recommissioning assessment was performed.